JJ Tech holds USA and selected foreign country patents on its line of Jet Pumps and accessories. This pump was developed to produce large volumes of sub-surface formation fluids with inclusions of moderate to high solid content. The unique patented design allows easy retrieval of the pump from deviated and horizontal wells. Retrieval of the pump from the hole for replacement of the nozzle or expansion tube is done by manipulation of the surface valves and reverse circulation of fluid with the existing production equipment (plunger pump, surface SP). No wire line, pulling unit or work over rig is required.

These features combined with the larger flow area, direct fluid flow path, and high production volumes give JJ Tech's Jet Pump a marked advantage over existing jet pump designs and artificial lifts. The small size of the portions of the pump retrieved (referred to as “the carrier” and measuring 6.5 inches and 8.5 inches in length) makes it very attractive to clients with highly deviated or horizontal wells that require artificial lift both on land and offshore.

In our industry, downtime means lost production. With the ease of servicing the hydraulic jet pump, you can literally cut your downtime by 2/3 when comparing hydraulic lifting to mechanical lift, PCP, ESP, and gas lift. For all the previous methods of AL, a work-over rig is needed to pull the equipment out of the well before servicing the down hole equipment.

With no moving parts in the bottom hole assembly, the jet pump is simply circulated out, or fished in worst case scenario, to service and replace parts. The power fluid injection unit (PD pump, Ultra-Flo or SPS) contains all the moving parts in the system. Therefore, all maintenance can be taken care of at the surface rather than thousands of feet underground.

JJ Tech SHFP Jet Pumps
Shown below are the three main JJ Tech SHFP Jet Pumps. These pumps have been installed worldwide with great success. Built to produce moderate to high volume wells with solids inclusion, the pumps metallurgy is incomparable to others on the market. With JJ Tech's line of Jet Pump and by utilizing the JJ Tech software, customers are able to obtain production rates of up to 8000 bpd. With the addition of the HSP, we are now able to give you the same high volume production with extreme solids content.

The JJ Tech 1.6 SHFP

• Slim Hole installation
• Can be run inside 2.375 tubing
• Can be run on 1" IJ or 1" Coil Tubing
• Used in de-watering of gas wells
• Used in casing isolation
• Fluid production up to 2000 bpd
• Carrier can be retrieved by reverse circulation or wire line.

JJ Tech 2.8 SHFP Jet Pump

• Conventional oil producing
• Can be run on 2.375 up to 4.5
• Fits inside 4.5 casing and up
• Fluid production up to 6000 bpd
• Carrier can be retrieved by reverse circulation or wire line.

JJ Tech 3.5 HSP SHFP

• Can be run on 2.375 to 4.5
• Can be run inside casing 5.0 and up.
• Special 3 coat hardening process for erosion and corrosion control.
• Carrier made from designer tool steel with tungsten carbide trumpet diffuser piece in part B.
• Produces wells with extremely high solids content
• Produces extremely high volume wells
• Production rates up to 8000 bpd
• Can be retrieved by reverse circulation or wire line

Technology