JJ Tech Technology
In association with Hraco (Gulf Coast), Tech-Flo Consulting is the sole distributor of JJ Tech technology in Texas and New Mexico (excluding a small portion of Northeast Texas.)

JJ Tech holds USA and selected foreign country patents on its line of Jet Pumps and accessories. This pump was developed to produce large volumes of sub-surface formation fluids with inclusions of moderate to high solid content. The unique patented design allows easy retrieval of the pump from deviated and horizontal wells. Retrieval of the pump from the hole for replacement of the nozzle or expansion tube is done by manipulation of the surface valves and reverse circulation of fluid with the existing production equipment (plunger pump, surface SP). No wire line, pulling unit or work over rig is required.

These features combined with the larger flow area, direct fluid flow path, and high production volumes give JJ Tech's Jet Pump a marked advantage over existing jet pump designs and artificial lifts. The small size of the portions of the pump retrieved (referred to as “the carrier” and measuring 6.5 inches and 8.5 inches in length) makes it very attractive to clients with highly deviated or horizontal wells that require artificial lift both on land and offshore.

In our industry, downtime means lost production. With the ease of servicing the hydraulic jet pump, you can literally cut your downtime by 2/3 when comparing hydraulic lifting to mechanical lift, PCP, ESP, and gas lift. For all the previous methods of AL, a work-over rig is needed to pull the equipment out of the well before servicing the down hole equipment.

With no moving parts in the bottom hole assembly, the jet pump is simply circulated out, or fished in worst case scenario, to service and replace parts. The power fluid injection unit (PD pump, Ultra-Flo or SPS) contains all the moving parts in the system. Therefore, all maintenance can be taken care of at the surface rather than thousands of feet underground.

Ultra-Flo Units
Every jet pump needs a power fluid driver on the surface. While searching for an alternate surface pump, we came across the idea for the ULTRA-FLO unit. By utilizing this system, jet pumping can become exponentially more efficient, down time can be reduced and production increased when put against beam pumping in marginal and low producing wells.

In late February of 2005, near Gladewater, Texas, a new system to produce oil wells was born: ULTRA - FLO. The ULTRA - FLO Production System (US patent #7,255,175 B2) combines a highly efficient patented down hole jet pump with a surface mounted diaphragm pump. The diaphragm pump, power plant, electric control panel and all valves, hoses, flow meters and controls are mounted on one compact 4 feet wide by 6 feet long skid.

The absence of sucker rods in the ULTRA - FLO System diminishes maintenance and wear on the production tubing and sucker rods, thereby avoiding costly shut downs for remedial action and the resulting loss of production. In the rare instance that the down hole pump needs to be retrieved, it can be circulated to the surface by reversing the flow from the tubing to the casing annulus. Retrieval of a down hole jet pump from a Woodbine formation well (3500 ft), inspecting the parts, and reinstalling the pump carrier takes less than one hour.

Production Vessels
Let Tech-Flo handle your production vessel needs. We deal with new and refurbished volume tanks, accumulators, 2 and 3 phase vessels of any size or psi. Both ASME code and non code vessels available. Call us to locate, manufacture, or refurbish your production vessels today.

Surface Pumps and Power Packages
Tech-Flo can also help with your power fluid injection and disposal pump needs. Let us supply you with surface horizontal pumps, triplex and Ultra-Flo pump packages with electric, diesel, crude or natural gas driver.